DID YOU KNOW THAT EVERY FLOWMETER FROM ELIS PLZEN HAS ITS OWN BIRTH CERTIFICATE?

ELIS PLZEN is a well-known European producer of electromagnetic and ultrasonic flow meters with more than 25 years of experience in this field. The whole production process of flow meters ends up with calibration on our K39 metrological center, which is one of the largest metrological centers in the Czech Republic. It consists of 3 calibration lines, two of them are located in Pilsen and one in Moravia in Oslavany, near Brno.

elisnews092016 1elisnews092016 2

You can see one of the following services provided by ELIS PLZEN:

- Repairs, calibrations and metrological verifications of flowmeters and water meters for liquid  applications
- Repairs, calibrations and metrological verifications of calorimetric counters
- Measurement of flow in liquids using a clamp-on ultrasonic flowmeter 

Test rig for flow meters – Manufacturing facility in Pilsen

Type MR-T-S 1540

Main parameters of the test equipment:

Rated inner diameter of flow meter: DN6 to DN40
Flow rate range: 0.006 to 12 m3/h
Fluid temperature range: 20°C to 70°C in tolerance according to CSN
Inputs for test evaluation: frequency and pulse input
Verification methods: volume and mass with flying or standing start
Uncertainty: 0.25%

Primary standards:

• Scale Mettler Toledo range 150 kg

Secondary standards:

• 3 pcs KROHNE electromagnetic flow meters DN2.5, DN10, DN25

 

elisnews092016 3

Test rig for flow meters – Manufacturing facility in Pilsen

Type EXPO 150

Main parameters of the test equipment:

Rated inner diameter of the flow meter: DN25 to DN150
Flow rate range: 0.15 to 150 m3/h
Fluid temperature range: 20°C to 70°C in tolerance according to CSN
Inputs for test evaluation: frequency, pulse and current (0/4 – 20 mA) input
Verification methods: volume and mass with flying or standing start
Uncertainty: 0.25%

Primary standards:

• Scale HELIOS range 4800 kg

• Scale HELIOS range 300 kg

Secondary standards:

• 3 pcs KROHNE electromagnetic flow meters DN10, DN25, DN100

 

elisnews092016 4

Test rig for flow meters – Manufacturing facility in Oslavany

Type GS 1500/32-800

 Main parameters of the test equipment:

 Rated inner diameter of flow meter: DN32 to DN900
Flow rate range: 0.005 to 1500 m3/h for metrological verification, technical options for calibration from 0.05 to 2200 m3/h
Fluid temperature range: 10 to 30°C
Inputs for test evaluation: frequency and pulse input
Verification methods: volume and mass with flying or standing start
Uncertainty: 0.2%

Primary standards:

• Scale Mettler Toledo, range 12 000 kg

• Scale Mettler Toledo, range 300 kg

Secondary standards:

• 4 pcs ELIS electromagnetic flow meters FLONET FN2015.1, DN6 to DN300

 

elisnews092016 5

The output of the calibration process is a “birth certificate” for each flowmeter – a calibration protocol, which is a part of each delivery. In order to know every detail about the specific flowmeter, you only need to know its serial number and all the details can then be found in the producer`s software archive.

With its K39 authorized metrological verification center K39, ELIS PLZEN is a fully self-sufficient and independent company. This fact guaranties not only the quality of the products, but also significant shortening of the delivery time of our products.

Thank you for your attention 

 

Magdalena ANDĚLOVÁ
Project Manager