Induction flow meters of the type series FLONET FF10XX.1 are intended for professional flow-rate measurements of electrically conductive fluids in the food-processing and chemical industries. The meters meet most demanding requirements regarding measurement accuracy, long-term parameter stability and hygienic suitability. Flow-rate measurements in both directions are possible.
The flow sensor doesn´t have any effect on the fluid flow characteristic or pressure in the connecting piping is negligible. The associated electronic unit supplies power to the sensor unit and processes the flow-rate signals.
The meters also have a dosing-control function, performs internal diagnostics and make possible selection of physical units for the quantities displayed. The meters have frequency, pulse and current outputs, and can be connected to external electronic devices via the RS 232 or RS 485 communication lines.
|usage||measurement of liquids in food industry|
|rated internal diameter||10 to 100mm, or 1/2" to 2 1/2" (Clamp)|
|rated pressure PN||10|
|min. conductivity of measured fluid||20μS/cm, on special requirement 5μS/cm|
|max. temperature of measured fluid||+150°C|
|electrode material||Hastelloy-C4 on special requirement platinum, tantalum or titanum|
|connections||Clamp (ITE Intertechnik DIN 32676), Tri Clamp (Tri Clover) screw fittings for food-processing applications (DIN 11851)|
|design version||compact or remote|
|measurement accuracy||±0.5% for flow rates 5 to 100% qs|
|measurement range||0.1 to 10m/sec|
|signal and communication outputs||(0) 4 to 20mA ~ (0 to qs)
frequency output 0 to 1.000Hz ~ (0 to qs )
pulse output 0.1 to 1.00l/imp ~ (0 to qs )
communication interfaces RS 232 and RS 485
|power source||24 / 115 / 230V AC +10 - 15%, 50 to 60Hz, 24V DC +10 - 15%|
|ambient temperature||-5°C to +55°C|
|protection class||IP67 / IP68 (sensor in remote verion)|
|FLONET FF10XX.1 (1.94 MB)|